Moroso Press-In Wheel Studs – 1/2in x 3in – 5 Pack

SKU: 46180 | UPC: 84663461804

Moroso Press-In Wheel Studs 1/2in x 3in 5 Pack Fits 1964-1982 Chevrolet Camaro Chevelle Corvette Nova Pontiac Firebird

Moroso 46180 press-in wheel studs measure 1/2″-20 thread by 3 inches overall length and install directly into aluminum or steel hubs on classic GM muscle cars. This 5-pack provides reliable wheel retention for drag racing and high-horsepower street builds on vehicles like 1967-1981 Camaro and 1964-1972 Chevelle. Knurled shanks ensure a tight press fit to handle extreme torque loads without spinning.

Key Features

• 1/2″-20 Thread: Matches OEM and aftermarket lug nuts on GM hubs for direct compatibility and secure fastening.
• 3 Inch Length: Extended reach accommodates thick spacers spacers and deep-dish drag wheels without bottoming out.
• Knurled Shank: 0.490-0.495 inch diameter grip locks into hub bore to prevent rotation under high radial and axial forces.
• High-Strength Steel: Case-hardened construction withstands over 10,000 lb pull-out force for safety in racing conditions.
• Black Oxide Finish: Resists rust and galling during repeated wheel changes in track environments.

Product Notes

• Intended for press-in installation into clean hub bores use light oil for assembly.
• Inspect hub threads and bores for damage before pressing new studs.
• Packaged in protective tube ships in 6 x 4 x 1 inch box.

Installation Notes

• Professional installation recommended.
• Use an arbor press or hydraulic tool to seat studs fully without damaging knurls.
• Compatible with 1/2″-20 chrome lug nuts torque to 100-120 ft-lbs.

This Part Fits

Year	Make	Model	Submodel
1967-1981	Chevrolet	Camaro	All
1964-1972	Chevrolet	Chevelle	All
1965-1982	Chevrolet	Corvette	All
1962-1979	Chevrolet	Nova	All
1967-1981	Pontiac	Firebird	All
1964-1972	Buick	GS	All
1964-1974	Chevrolet	Impala	All
1968-1972	Chevrolet	Chevy II	All

Why Choose Moroso?

• Proven in NHRA and IHRA drag racing since 1968.
• Built to endure 500+ mph wheel speeds and 10,000+ lb vehicles.
• Machined to micron tolerances for consistent hub engagement.

Frequently Asked Questions

• Q: Which vehicles use these 1/2″-20 press-in studs?
  A: Designed for 1964-1982 GM A-Body and F-Body like Camaro Chevelle Nova Firebird Corvette with matching hub bores confirm bore size measures 0.500-0.505 inches.
• Q: What material and strength rating?
  A: Forged alloy steel heat-treated to 180,000 PSI tensile strength black oxide plated for corrosion resistance.
• Q: Do these require special tools or warranty info?
  A: Arbor press needed for install Moroso offers limited lifetime warranty against manufacturing defects when installed correctly.

Shipping & Handling

• Method: UPS Ground or USPS Priority
• Availability: In stock – ships same or next business day
• Packaging: 6 x 4 x 1 inch cardboard box
• Weight: 0.80 lbs