SKU: 23905 | UPC: 84663239052
Moroso Accumulator Solenoid Valve – 12 Volt Universal Fit
The Moroso Accumulator Solenoid Valve energizes to release hydraulic pressure from accumulators in clutch systems for fast gear changes in racing applications. This 12-volt valve fits universal setups with electric hydraulic throwout bearings or slave cylinders on manual transmissions. It delivers consistent performance by holding pressure until activated.
Key Features
- 12-Volt Operation: Draws low amperage for direct connection to vehicle electrical systems without draining battery
- Normally Closed Design: Retains accumulator pressure safely until solenoid receives signal for quick dump
- 1/8 Inch NPT Ports: Standard threading allows simple integration with hydraulic lines and fittings
- CNC Machined Aluminum Body: Lightweight at 4 ounces with corrosion-resistant finish for long-term durability
- Compact Size: Measures 2 inches long by 1 inch diameter for mounting in confined engine compartments
Product Notes
- Pair with Moroso PN 23940 accumulator or similar for electric hydraulic clutch setups
- Wire to momentary switch or controller for driver-activated pressure release
- Ships in 6 x 4 x 2 inch box weighing 0.5 pounds total
Installation Notes
- Professional installation recommended.
- Plumb inline between accumulator and hydraulic line using 1/8 NPT fittings
- Mount with bracket away from exhaust heat. use 16-gauge wire with inline fuse
This Part Fits
| Year | Make | Model | Submodel |
|---|---|---|---|
| Universal | Universal | Racing Vehicles | Hydraulic Clutch Systems |
| 1960+ | Chevrolet | Camaro | All Manual Trans |
| 1960+ | Ford | Mustang | All Manual Trans |
| 1960+ | Dodge | Challenger | All Manual Trans |
Why Choose Moroso?
- Proven in NHRA and drag racing since 1958
- Billet aluminum construction handles 1000 PSI bursts
- Engineered for zero-failure shifts in competition
Frequently Asked Questions
- Q: Will this work with my hydraulic throwout bearing?
A: Yes, designed for Moroso electric systems and compatible universal hydraulic accumulators on T5, TKO, or Toploader transmissions - Q: What material is the valve body?
A: CNC machined from aircraft-grade aluminum with anodized finish for heat and chemical resistance - Q: What power setup is needed?
A: Connect to 12V switched circuit with 5-amp fuse. solenoid draws under 2 amps for reliable operation
Shipping & Handling
- Method: UPS Ground
- Availability: In stock – ships same or next business day
- Packaging: Foam-protected box measuring 6 x 4 x 2 inches
- Weight: 0.25 pounds
Reviews
There are no reviews yet.