Kooks 2″ x 3″ Long Tube Headers & Off-Road Connection Pipes for 2016 and 2024 Chevrolet Camaro SS/ZL1 6.2L LT1/LT4
The Kooks 2-inch x 3-inch long tube headers and off-road (catless) connection pipes kit delivers the maximum-flow bolt-on exhaust upgrade for 2016 and 2024 Chevrolet Camaro SS (LT1) and ZL1 (LT4) models with the 6.2L V8, replacing factory manifolds to unlock dyno-proven gains of 65 and 85 rear-wheel horsepower and 60 and 80 lb-ft of torque through equal-length primaries, merged collectors, and high-flow 3-inch off-road pipes that bolt directly to the OEM mid-pipe for unrestricted flow from idle to redline.
Handcrafted from T304 aircraft-quality stainless steel with 3/8-inch laser-cut flanges and full TIG welds, this race-oriented system supports over 1,000 HP with no catalytic converters for competition use while preserving the Camaro’s aggressive V8 soundtrack without drone. The precision design maintains factory ground clearance and heat shielding for daily-driven performance machines.
For Camaro SS and ZL1 owners who demand championship-level performance for track or off-road competition, the 22606280 kit is the race-winning, complete bolt-on solution trusted by enthusiasts and racers worldwide.
Key Features
- 2-inch equal-length mandrel-bent primaries for maximum scavenging
- 3-inch off-road (catless) connection pipes for unrestricted flow
- Full T304 stainless steel with TIG welds and 3/8-inch flanges
- Merged collectors for optimal exhaust velocity
- Direct bolt-on to OEM mid-pipe no cutting required
- Dyno gains of 65 and 85 RWHP and 60 and 80 RWTQ
Product Notes
- Off-road use only and not 50-state legal
- Fits 2016 and 2024 Camaro SS (LT1) and ZL1 (LT4) coupe and convertible
- Includes O2 extensions and all necessary hardware
California Proposition 65: Contains chemicals known to the State of California to cause cancer or reproductive harm.
Warranty: Limited lifetime on stainless construction to original purchaser.
Installation Notes
- Professional installation required lift and exhaust experience needed
- Remove factory manifolds and bolt headers to cylinder heads
- Connect off-road pipes to collectors and OEM mid-pipe
- Torque flanges to 25-30 ft-lbs and run drive cycle for ECU adaptation
This Part Fits
| Year | Make | Model | Submodel/Engine |
|---|---|---|---|
| 2016 and 2024 | Chevrolet | Camaro | SS. LT1 6.2L V8 |
| 2017 and 2024 | Chevrolet | Camaro | ZL1. LT4 6.2L Supercharged V8 |
Note: Fits all 6th-gen Camaro SS/ZL1 coupe and convertible. Off-road use only.
What’s Included in the Purchase
- (2) 2″ x 3″ Long-Tube T304 Stainless Headers with Merged Collectors
- (2) 3″ Off-Road (Catless) Connection Pipes
- Gaskets, Stage 8 Locking Bolts, Clamps and Hardware
- O2 Sensor Extensions
- Detailed Installation Instructions
- Part Number: Kooks 22606280
Why Choose Kooks?
- Over 60 years of championship-winning exhaust engineering
- Handcrafted in the USA from T304 aircraft-quality stainless steel
- Limited lifetime warranty and dyno-proven performance
Frequently Asked Questions
- Q: Is this street legal?
A: No, off-road/race use only and no catalytic converters - Q: Does this fit my 2022 ZL1?
A: Yes, direct bolt-on for all 2016 and 2024 SS and ZL1 - Q: How loud is it?
A: Very aggressive and full race tone with zero drone - Do Kooks headers require a tune after installation?
Yes. A professional tune is strongly recommended after installing long tube headers. The significant improvement in exhaust flow changes air fuel ratios and requires ECM recalibration to achieve optimal power output and safe operation. - Will these headers void my factory powertrain warranty?
Under the Magnuson-Moss Warranty Act, a manufacturer cannot void your vehicle warranty simply because you installed an aftermarket part unless they prove the component directly caused the failure. Consult your dealer for specifics on your situation. - Q: Do these Kooks headers require a tune after installation?
A: Yes. A professional tune is strongly recommended after installing long tube headers. The significant improvement in exhaust flow changes air fuel ratios and requires ECM recalibration to achieve optimal power output and safe operation. - Q: Will Kooks headers void my factory powertrain warranty?
A: Under the Magnuson-Moss Warranty Act, a manufacturer cannot void your vehicle warranty simply because you installed an aftermarket part unless they prove the component directly caused the failure in question. Consult your dealer for specifics. - Q: What warranty does Kooks provide?
A: Kooks products are backed by a limited lifetime warranty to the original purchaser against defects in materials and workmanship. Racing and competition use applications may have specific warranty exclusions. Contact Kooks Performance directly for warranty details.
Shipping & Handling
- Method: UPS or Fed Ex Ground.
- Availability: Typically ships same day or next if in stock.
- Packaging: Heavy-duty box with foam protection.
Reviews
There are no reviews yet.