Innovative 88-91 Prelude H-Series Competition Traction Bar Kit

SKU: 59113

Innovative 88-91 Prelude H-Series Competition Traction Bar Kit

This Competition Traction Bar Kit from Innovative bolts onto 1988-1991 Honda Prelude chassis with H-Series engine swaps to plant rear tires during hard acceleration. It channels engine power straight to the ground for quicker 60-foot times and consistent launches on drag strips or autocross. Weighing just 15 lbs drivers experience reduced wheel hop and better traction control.

Key Features

• 4130 Chromoly Steel Construction: 1-3/8 inch diameter 0.120 wall tubing handles extreme torque loads at low 15 lb weight
• Fully Adjustable Design: Threaded ends and heim joints enable precise length and angle adjustments for any suspension geometry or tire setup
• PTFE-Lined Heim Joints: Deliver smooth movement under heavy load with no binding for traction through full launch sequence
• Black Powder-Coated Finish: Protects against corrosion and track impacts for durability in wet or abrasive conditions
• Complete Bolt-On Kit: Grade 8 hardware billet aluminum brackets and instructions mount directly from rear subframe to differential

Product Notes

• Engineered for H-Series swapped Preludes verify subframe condition before install
• Torque fasteners to spec and recheck after 100 miles of use
• Arrives fully assembled ready for straightforward setup

Installation Notes

• Professional installation recommended.
• Bolt-on to OEM rear subframe and differential no welding required
• Compatible with stock axles and most aftermarket rear suspensions

This Part Fits

Year	Make	Model	Submodel
1988-1990	Honda	Prelude	2.0 S
1988-1991	Honda	Prelude	2.0 Si
1988-1989	Honda	Prelude	2.0 Si 4WS
1990-1991	Honda	Prelude	Si
1990-1991	Honda	Prelude	Si 4WS
1990-1991	Honda	Prelude	Si ALB

Why Choose Innovative?

• Race-proven on drag strips and road courses worldwide
• Hand-built with aircraft-grade materials for Honda platforms
• Limited lifetime warranty against defects

Frequently Asked Questions

• Q: Does this fit H22 or H23 swapped 88-91 Preludes?
  A: Yes fits all H-Series transmissions in 1988-1991 Prelude chassis including H22A H23A with stock or modified rear subframes
• Q: What materials and finish are used?
  A: 4130 chromoly steel bars 6061-T6 aluminum brackets PTFE-lined heim joints and black powder coat for rust protection
• Q: How long is installation and what tools are needed?
  A: 2-4 hours with basic hand tools jack stands and torque wrench professional help advised for first-time installers

Shipping & Handling

• Method: UPS Ground
• Availability: In stock – ships same or next business day
• Packaging: One sturdy box 42 x 8 x 8 inches
• Weight: 15 lbs