GiroDisc 2012+ Tesla Model S Slotted Rear Rotors

SKU: A2-273

GiroDisc 2012+ Tesla Model S Slotted Rear Rotors

GiroDisc 2012+ Tesla Model S Slotted Rear Rotors form a two-piece set engineered for the rear axle of 2012-2021 Tesla Model S sedans. These direct-replacement rotors use slotted high-carbon iron rings attached to black anodized aluminum hats for reduced weight and improved heat management during hard driving. Drivers gain consistent pedal feel and shorter stopping distances without fade.

Key Features

• Two-Piece Construction: 6061-T6 aircraft-grade aluminum hats with high-carbon ductile iron rings float independently to handle expansion and minimize warping under extreme heat.
• Slotted Design: 48 precision slots per side clear gases, water, and debris while increasing initial bite and reducing brake fade on track or street.
• Weight Savings: Each rotor weighs 22 lbs versus OEM 28 lbs, cutting 12 lbs total unsprung rear mass for sharper handling and acceleration.
• Curved Vane Cooling: Internal 42 curved vanes direct airflow to pull heat from the rotor face at speeds up to 3,000 CFM for sustained performance.
• Patented Retention System: Steel bobbins and stainless hardware secure the ring to the hat with zero play, ensuring balance and quiet operation.

Product Notes

• Sold as a pair (one left, one right) with identical specs for both sides.
• Special order item with typical lead time of 5-10 business days from GiroDisc.
• Fits OEM calipers, pads, and hardware. no modifications needed.

Installation Notes

• Professional installation recommended.
• Torque hardware to GiroDisc specs (25 ft-lbs for bobbins) during assembly.
• Follow GiroDisc bed-in procedure: 10 stops from 60-10 mph with cooling between sets.

This Part Fits

Year	Make	Model	Submodel
2012-2021	Tesla	Model S	All (85, P85, 60, P100D)

Why Choose GiroDisc?

• Track-tested in endurance racing with Tesla teams for real-world durability.
• CNC-machined in USA from aerospace materials for exact fit and balance.
• High-carbon iron resists cracking after thousands of heat cycles.

Frequently Asked Questions

• Q: Will these rotors fit 2021+ refreshed Tesla Model S?
  A: Designed for 2012-2021 pre-refresh Model S with 355mm x 28mm rear rotors. refreshed models use different sizing.
• Q: What materials are used in construction?
  A: Black anodized 6061-T6 aluminum hats paired with 48 Rockwell C high-carbon ductile iron slotted rings.
• Q: What warranty coverage applies?
  A: Lifetime warranty against defects, cracking, or bobbin failure when installed and bedded per instructions.

Shipping & Handling

• Method: UPS Ground (continental US)
• Availability: Special order – ships 5-10 business days after order
• Packaging: Oversized box measures 28 x 16 x 16 inches
• Weight: 48 lbs (pair with packaging)