AMP Research 2025 RAM 1500 (Gas ONLY) PowerStep Plug & Play – Black

SKU: 76364-01A / UPC: 810150196696

AMP Research PowerStep Plug & Play Running Boards for 2025 RAM 1500 Gas Models

The 2025 RAM 1500 with the AMP Research PowerStep Plug & Play system, model 76364-01A. This electric retractable running board setup delivers automatic deployment as doors open, providing a stable 6-inch wide step that lowers further than fixed boards for easier entry and exit. When doors close, the boards stow cleanly under the rocker panel, maintaining ground clearance and a streamlined look. Built with die-cast aluminum alloy components and stainless steel pivot pins, it handles real-world demands with a 600-pound load capacity per side, ensuring dependable support for passengers and gear.

Precise Vehicle Fitment

Designed exclusively for gas-engine 2025 RAM 1500 models, this PowerStep fits:

• 2025 RAM 1500 Crew Cab (standard 79-inch board length, no modifications needed).
• 2025 RAM 1500 Quad Cab (72-inch board length after a simple 7-inch trim for perfect alignment).

Compatible with RAM RHO gas variants, but excludes TRX models due to harness relocation differences. Confirm your cab style and engine type (gas only) for seamless installation on the factory frame mounting points.

Complete Package: What’s Included in Your Purchase

Every 76364-01A kit arrives fully equipped for a straightforward plug-and-play install, including:

• 1 x Running Board Assembly (extruded aluminum with black textured powder-coat finish for corrosion resistance).
• Passenger and Driver Motor Linkage Assemblies (2 total, with integrated motors for smooth operation).
• 2 x Idler Linkage Assemblies (for rear support).
• Wire Harness and Controller (SSA module with simplified OBD-II plug for direct connection to the vehicle’s port).
• 4 x LED Lamps (courtesy lights that activate on door open, with 5-minute timeout).
• Hardware Kit: 8 x Socket Cap Screws, 12 x Nuts with Conical Washers, 22 x Cable Ties (various sizes), 8 x Butt Connectors, 4 x Grommets, 2 x Posi-Taps, 2 x (S) Style Clips (for Quad Cab trimming), and Delta PT screws.
• End Caps and Inserts: Left and right end caps (1 each), 2 x T-nut inserts.
• Additional Components: OBD-II Smart Series plug, harness relocation bracket (non-TRX), gear covers for motors, and Posi-Lock connectors.
• Optional Accessory: OBD-II pass-through harness (part 76404-01A) sold separately for added port access.

Installation takes 3-5 hours with basic tools like sockets (10mm, 13mm, 1/2-inch), hex keys (3/16-inch, 4mm), wire tools, and silicone spray. Mounts to existing sill studs, torque motor screws to 36 in-lbs, board fasteners to 10 ft-lbs, and linkage nuts to 16 ft-lbs. The app (AMP Research PowerStep) allows light overrides and diagnostics via Bluetooth.

Key Specifications

• Step Drop: Deploys approximately 7 inches below the rocker panel for a total reach of 14 inches ground-to-step ideal for taller trucks like the RAM 1500.
• Product Weight: 55 pounds (complete pair).
• Shipping Box Dimensions: 8 inches (length) x 13 inches (width) x 81 inches (height) compact for transport yet robust for protection.
• Power Requirements: 12V vehicle battery connection, includes fuses and weatherproof wiring.
• Finish: Durable black powder-coat over aluminum to resist rust and daily wear.
• Warranty: 5-year/60,000-mile limited coverage against defects in materials and workmanship (original purchaser only, register at realtruck.com for priority support).

This AMP Research 76364-01A PowerStep stands out for its proven reliability in automatic operation, integrated LED illumination, and heavy-duty construction that outperforms static steps in convenience and strength making it the practical pick for 2025 RAM 1500 owners seeking effortless truck access without compromises. Order now to experience the difference in your daily drive.